(Note: Currently out of stock, and uncertain lead time on this product. Contact us for current status.) Raspberry Pi Compute Module 3+
Specification
The
CM3+ Compute Module contains the guts of a Raspberry Pi 3 Model B+ (the
BCM2837 processor and 1GB RAM) as well as an optional eMMC Flash device
of 8GB, 16GB or 32GB (which is the equivalent of the SD card in the
Pi).
8GB/16GB/32GB eMMC Flash memory, or a Lite variant without eMMC Flash memory
This
is all integrated onto a small (67.6mm × 31mm) board that fits into a
standard DDR2 SODIMM connector. The Flash memory is connected directly
to the processor on the board, but the remaining processor interfaces
are available to the user via the connector pins. You get the full
flexibility of the BCM2837 SoC (which means that many more GPIOs and
interfaces are available than with a standard Raspberry Pi), and
designing the Module into a custom system should be relatively
straightforward because we’ve put all the tricky bits onto the Module
itself.
